What is Injection Molding Machine?
An Injection molding machine, also known as an injection press, is a machine for manufacturing plastic products by the injection molding process. It consists of two main parts, an injection unit and a clamping unit.
Injection molding machines can fasten the molds in either a horizontal or vertical position. The majority of machines are horizontally oriented, but vertical machines are used in some niche applications such as insert molding, allowing the machine to take advantage of gravity. Some vertical machines also don’t require the mold to be fastened. There are many ways to fasten the tools to the platens, the most common being manual clamps (both halves are bolted to the platens); however hydraulic clamps (chocks are used to hold the tool in place) and magnetic clamps are also used. The magnetic and hydraulic clamps are used where fast tool changes are required.
The person designing the mold chooses whether the mold uses a cold runner system or a hot runner system to carry the plastic from the injection unit to the cavities. A cold runner is a simple channel carved into the mold. The plastic that fills the cold runner cools as the part cools and is then ejected with the part as a sprue. A hot runner system is more complicated, often using cartridge heaters to keep the plastic in the runners hot as the part cools. After the part is ejected, the plastic remaining in a hot runner is injected into the next part.
Machines are classified primarily by the type of driving systems they use: hydraulic, mechanical, electric, or hybrid.
Hydraulic
Hydraulic presses have historically been the only option available to molders until Nissei Plastic Industrial Co., LTD introduced the first all-electric injection molding machine in 1983. Hydraulic machines, although not nearly as precise, are the predominant type in most of the world, with the exception of Japan.
Mechanical
Mechanical type machines use the toggle system for building up tonnage on the clamp side of the machine. Tonnage is required on all machines so that the clamp side of the machine does not open (i.e. tool half mounted on the platen) due to the injection pressure. If the tool half opens up it will create flash in the plastic product.
Hybrid injection (sometimes referred to as “Servo-Hydraulic”) molding machines claim to take advantage of the best features of both hydraulic and electric systems, but in actuality use almost the same amount of electricity to operate as a standard hydraulic,
Tips for buying an Injection Molding Machine
When you buy injection molding machine, the knowledge you need to know What is injection molding machine? The Wikipedia give the answer like this “An
What is vertical injection molding machine？
What is vertical injection molding machine？ With the rapid development of the plastics industry,the status of the injection molding machine rising to become one of
Which are the injection mold composed of？
Which are the injection mold composed of？ Injection Mould Although the structure of the mold will change because of the change of the plastic variety
What is injection molding？
What is injection molding？ CONTACT US Injection Mould On thermoplastics，the injection molding machine make plastic particulate material through melting,injection, packing, cooling cycle into final plastic
How to choose Injection molding machine for green hand？
How to choose Injection molding machine for green hand？ In general,most customers who work In injection molding industry for many years, have the ability to
High Temperature damage your Injection Molding Machine in 5 Ways
High Temperature damage your Injection Molding Machine in 5 Ways There will be five harm if the temperature of the injection molding machine is high…
